Marine Hardware Oarlocks Leathers And Accessories

We offer a large selection of oarlocks, boat parts cleat - hyperlink, oar sockets, specialty hardware, and equipment to complement high quality boats. Our oar sockets and normal oar locks are made within the USA by Perko. We manufacture our patent swivel oarlocks, outrigger oar brackets, and #1-1/2 horns.

from

Back to Top

Easy methods to Size Your Oars

To determine the proper size oar for your boat measure the space between the port and starboard oar sockets. Then apply the Shaw and Tenney oar length method to find out the oar length that may provide the right 7:18 leverage ratio. This length will provide an oar where 7/25 the length is inboard of the oarlocks and 18/25 of the oar is outboard of the oarlocks. It's the perfect ratio to row almost all boats. Sized accurately, when rowing your arms shall be 1 to three inches apart and you'll be pulling immediately towards your abdomen. If you are popping out of your oarlocks when rowing your oars are far too quick. If you cherished this article so you would like to obtain more info concerning marine hinge sale nicely visit our webpage. If you happen to desire an overlapping grip, add 6" to the calculated oar size. When you have a couple of rowing station in your boat, measure each. Typically they would require two completely different size oars which is okay if you’re going to be rowing tandem and want two units. Otherwise you’ll must compromise the proper size to work correctly in both stations. In case you are rowing more than 75% in one station measurement the oar to that length. As at all times be at liberty to name us and have been happy to help you select the proper oar size and blade fashion in your boat.

The unique Shaw & Tenney Oar Length Formula

To help our prospects measurement their oars appropriately, we’ve been using the identical components since 1858: Measure the distance between the middle of the port and starboard oar sockets, which hold the oar locks on each gunnel. This is named the "span" between the oarlocks. Divide the span by 2, after which add 2 to this quantity. The end result known as the "inboard loom length" of the oar. Multiply the loom length by 25, and then divide that number by 7. The result is the proper oar length in inches. Round up or all the way down to the closest 6" increment.

Methods to Size Your Paddle

For conventional wood paddles the best length for the Stern paddler is the bridge of your nose or 6 inches less than your top. For the bow paddler the paddle reaching the cleft of your chin or marine hinge sale 9 inches less than your top is appropriate. For our Racine paddle if you're over 5’6" tall choose the 63-1/2" size. The shorter paddle if you're under5’-6"tall.


When paddling solo we usually suggest a bow length paddle. For Canadian model solo most paddlers want a good shorter paddle.